28Khz 800w Digital Ultrasonic spot welding system for car bumpers and Components welding

Parameter

Deacription

The welding principle of the ultrasonic metal welding machine is to convert the current of 50/60 Hz into electric energy of 15, 20 kHz through the ultrasonic generator. Then the converted high-frequency electric energy is converted into mechanical motion of the same frequency again through the transducer, and then the mechanical motion is transmitted to the welding head of the ultrasonic welding machine through a set of amplitude modulator equipment that can change its amplitude.

Then, the welding head will receive the vibration, so as to transfer the energy to the joint part of the workpiece waiting to be welded. In this area, the energy of the vibration will be further converted into heat energy by means of friction and vibration, and the plastic will be melted. When the vibration ceases, the short pressure maintained on the workpiece will cause the two weldments to merge together in a molecular link.

Feature

1. High-quality imported ultrasonic transducer with strong power and good stability

2. The design of the whole machine is exquisite, and the volume is small and does not occupy space

3. 500W is more powerful and powerful than other ordinary products.

4. The main components are imported and assembled with high quality.

5. The noise is low and the working environment is environmentally friendly.

Instructions

1. Connect one end of the cable to the output control cable connector on the vibrating tube, and the other end to the output control cable socket on the back of the electric box, and tighten it.

2. Wipe the connecting surface of the welding head clean, connect it to the transducer of the vibrating tube, and lock it with a wrench. Note: When connecting, you must ensure that the two connecting surfaces between the welding head and the transducer are consistent and locked. Do not allow the connection screws to be too long or the sliding teeth cannot be locked, otherwise the sound wave will not be transmitted smoothly and cause damage to the unit.

3. When loading and unloading the welding head, two wrenches must be used to clamp the welding and the transducer respectively, and one of the parts must not be locked or loaded or unloaded, so as to avoid damage to the hand-held vibrator.

4. After checking that points 1 and 2 are installed properly, plug the power cord socket into the external power socket, and flip the power switch, then the power indicator light is on.

5. Lightly press the sound wave control switch, and you can hear the "squeak" sound of the welding hair when the sound wave is transmitted to the welding head, indicating that the machine is working normally and can be put into use.

6. When the machine is working abnormally, do not disassemble the equipment privately. Please notify the supplier or send the equipment to the manufacturer for inspection and maintenance.

Picture

R-Responsibility P-Products S-Service

sale the right products instead of the expensive one

Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the right product for the customer. So before each order, we will confirm all the details, including application details, equipment conditions, equipment specific information.

And we have the Professional import and export company， HangZhou LanBen Trade Co., Ltd, can export to any country wordwide.

Before year 2012, we only sale second branson / dukane / rinco / herrman/telsonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about transducer , to use ultrasonic equipment better, to save cost when meet problem.

The same to generator, Unreasonable operation may shorter the use-life of ultrasonic generator. So we have to make technical inquiry before operate ultrasonic welding machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment.

Till now , we still have a lot of Branson /dukane/ rinco/ herrman telsonic welding machine, so that we can confirm every transducer/generator we made can matching to the original machine.

Of course we can make the transducer/generator replace for Branson /dukane/ rinco/ herrman telsonic welding machine, we can also make transducer/generator for any application of your ultrasonic equipment. We supply OEM service for oversea customers, we already have OEM customer in USA and German.

If you have any problem in ultrasonic area, welcome contact Rps-sonic.