Large scale applied Ultrasonic Liquid Processor for Graphene dispersion

Parameter

Introduction:

Ultrasonic graphene dispersion equipment
Graphene is the thinnest and hardest two-dimensional material in the world composed of a single layer of carbon atoms. Its very good strength, flexibility, electrical conductivity, and thermal conductivity have important functions in various fields. In the natural state, there is no single-layered inkene material-it generally exists as three-dimensional graphite. It is very important to extract single-layered graphene from graphite.
Ultrasonic graphene dispersion is also called ultrasonic graphene peeling. The graphite oxide reduction method is used in conjunction with ultrasonic vibration to effectively increase the distance between graphite oxide layers. Graphite oxide with a large layer distance is not only beneficial for other molecules and atoms to insert between layers to form graphite oxide. Intercalation composite materials can be easily peeled into single-layer graphite oxide, laying a foundation for the further preparation of single-layer graphene.

Ultrasonic dispersion principle
The ultrasonic nano-dispersion system / ultrasonic graphene dispersion equipment uses the cavitation of ultrasonic waves to disperse agglomerated particles. It is the
The granular suspension (liquid) is placed in a super-strong sound field and processed with appropriate ultrasonic amplitude. In cavitation effect, high temperature, high pressure, microjet, strong vibration, etc.
Under the additional effect, the distance between the molecules will continue to increase, eventually causing the molecules to break up and form a single molecular structure. This product is especially useful for dispersing nanomaterials
(Such as carbon nanotubes, graphene, silica, etc.) have good results.
There are a large number of graphite materials in nature, and 1 millimeter thick graphite contains approximately 3 million layers of graphene. Single layer of graphite is called graphene, in a free state
This substance does not exist below, and all exist in the form of graphite sheets laminated with multilayer graphene. Because the interlayer force of the graphite sheet is weak, it can be carried out by external force.
The layers were peeled off to obtain a single-layer graphene with a thickness of only one carbon atom.
The ultrasonic graphene dispersion system uses the ultrasonic-assisted Hummers method to prepare graphene oxide. It uses a liquid as a medium and adds high-frequency ultrasonic vibration to the liquid. Since ultrasound is a mechanical wave, it is not absorbed by the molecules, and the vibrational motion of the molecules is arched during the propagation process. Under the effect of cavitation, that is, high temperature, high pressure, microjet, strong vibration and other additional effects, the distance between molecules increases its average distance due to vibration, and eventually causes the molecules to break. The distance between graphite oxide layers can be increased more effectively, and with the increase of the ultrasonic power, the interval between the obtained graphite oxide layers is increasing. The pressure released by the instantaneous ultrasonic wave destroys the van der Waals force between the graphene layer and the layer, making it more difficult for graphene to cluster together. Graphite oxide with a large interlayer distance is not only conducive to the insertion of other molecules, atoms and other interlayers to form a graphite oxide intercalation composite material, but also is easily peeled into a single layer of graphite oxide
Lay the foundation for the further preparation of single-layer graphene.
Ultrasonic dispersing equipment can be used for the dispersion and homogenization of graphene, ink coatings, etc .; petroleum emulsification; traditional Chinese medicine extraction processing; cell, ballast water crushing, disinfection; accelerated reaction of chemical raw materials.

Application:

R-Responsibility P-Products S-Service

sale the right products instead of the expensive one

Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the right product for the customer. So before each order, we will confirm all the details, including application details, equipment conditions, equipment specific information.

And we have the Professional import and export company， HangZhou LanBen Trade Co., Ltd, can export to any country wordwide.

Before year 2012, we only sale second branson / dukane / rinco / herrman/telsonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about transducer , to use ultrasonic equipment better, to save cost when meet problem.

The same to generator, Unreasonable operation may shorter the use-life of ultrasonic generator. So we have to make technical inquiry before operate ultrasonic welding machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment.

Till now , we still have a lot of Branson /dukane/ rinco/ herrman telsonic welding machine, so that we can confirm every transducer/generator we made can matching to the original machine.

Of course we can make the transducer/generator replace for Branson /dukane/ rinco/ herrman telsonic welding machine, we can also make transducer/generator for any application of your ultrasonic equipment. We supply OEM service for oversea customers, we already have OEM customer in USA and German.

If you have any problem in ultrasonic area, welcome contact Rps-sonic.