20Khz 1500w Ultrasonic Homogenizer For Ultrasonic dispersion and depolymerization

Parameter

Description

An important application of ultrasonic dispersion is to disperse and deaggregate solids in liquids. Ultrasonic dispersion is based on ultrasonic cavitation. It is mainly used to reduce small particles in the liquid to improve the uniformity and stability of the liquid. It is an effective method to reduce soft and hard particles. Ultrasonic dispersion can be easily extended from laboratory-level equipment to industrial production. The process and effect of ultrasonic dispersion in industrial production are the same as laboratory test results.

Traditional decentralization technology

A common method of mixing powders into liquids to prepare various products (such as paints, inks, shampoos, beverages or polishing media). Individual particles are combined together by the attraction of various physical and chemical properties (including van der Waals force and liquid surface tension), and the effect is more obvious for higher viscosity liquids such as polymers or resins. This attraction must be overcome to de-agglomerate and disperse the particles into the liquid medium. The application of mechanical stress can break the agglomeration of the particles while the liquid is pressed between the particles. Different techniques are usually used to disperse the powder in the liquid. This includes high-pressure homogenizers, agitator bead mills, jet impact mills and rotor-stator mixers.

High-intensity ultrasonic dispersion technology is an effective alternative to the above technology. When ultrasonic waves are transmitted into the liquid, the ultrasonic waves in the liquid medium will produce alternating cycles of high pressure (compression) and low pressure (dilution). The mechanical stress is used to attract electrostatic forces (such as van der Waals forces) that use particles to gather together. Ultrasonic cavitation in the liquid causes high-speed liquid jets up to 1000km/h (about 600mph). Such a jet squeezes the liquid at high pressure between the particles and separates them from each other. The smaller particles are accelerated by the liquid jet and collide at high speed. This makes ultrasound an effective means of dispersion and depolymerization, and it is also used for the grinding and fine grinding of micron and sub-micron size particles.

RPS-SONIC provides equipment for single or batch processing of ultrasonic dispersion and depolymerization of any volume.
Experimental-grade ultrasonic dispersion equipment can be used to process liquids with a volume from 1.5 ml to about 2L. Industrial-grade ultrasonic dispersion equipment is used for production and development, and handles liquids with a volume from 0.5L to about 2000L.

Features

1. Easy to expand
Unlike other dispersion technologies, ultrasonic dispersion can be easily expanded from laboratory-level equipment to industrial production, and laboratory testing will allow accurate selection of the required equipment size. When used in the final large-scale production, the ultrasonic dispersion process and effect are the same as the laboratory test results.

2. Easy to clean
Ultrasound is a well-known cleaning application, such as surface, partial cleaning. The intensity of ultrasonic waves used for dispersion applications is much higher than that of typical ultrasonic cleaning. When the wet part of the ultrasonic device is designed to be cleaned, ultrasonic vibration can be used to assist in flushing and cleaning.

R-Responsibility P-Products S-Service

sale the right products instead of the expensive one

Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the right product for the customer. So before each order, we will confirm all the details, including application details, equipment conditions, equipment specific information.

And we have the Professional import and export company， HangZhou LanBen Trade Co., Ltd, can export to any country wordwide.

Before year 2012, we only sale second branson / dukane / rinco / herrman/telsonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about transducer , to use ultrasonic equipment better, to save cost when meet problem.

The same to generator, Unreasonable operation may shorter the use-life of ultrasonic generator. So we have to make technical inquiry before operate ultrasonic welding machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment.

Till now , we still have a lot of Branson /dukane/ rinco/ herrman telsonic welding machine, so that we can confirm every transducer/generator we made can matching to the original machine.

Of course we can make the transducer/generator replace for Branson /dukane/ rinco/ herrman telsonic welding machine, we can also make transducer/generator for any application of your ultrasonic equipment. We supply OEM service for oversea customers, we already have OEM customer in USA and German.

If you have any problem in ultrasonic area, welcome contact Rps-sonic.