30Khz 500w Robot Arm Ultrasonic Cutting System For Fabric Cashmere Cutting With RS485

30Khz Robot arm Ultrasonic cutting system for fabric Cashmere cutting

Parameter

Different fabric cutting processes

The cutting process of fabrics is generally divided into two types: cold cutting and hot cutting. Both of these cutting methods have certain limitations.

Ultrasonic fabric cutting is compared with cold cutting. When using ultrasonic fabric cutting, after the thermoplastic material is cut, the edges of the cut will be fused; compared with thermal cutting, using ultrasonic cutting can make the edges of the cut fabric very soft , To avoid excessive thickening of edges due to melt shrinkage. Since the ultrasonic is heated from the inside of the fabric, there will be no yellowing of the fabric.

Description

The basic structure of the sonic cutting machine. Ultrasonic transducer, ultrasonic horn, ultrasonic cutting knife, ultrasonic generator.
Ultrasonic generator
The mains electricity is converted into high frequency and high voltage alternating current, which is output to the ultrasonic transducer. Ultrasonic transducer is equivalent to energy conversion device, it can convert the input electric energy into mechanical energy, namely ultrasonic wave. The ultrasonic transducer stretches back and forth in the longitudinal direction, and the frequency of the stretch movement is equal to the frequency of the high-frequency alternating current supplied by the driving power source.
Ultrasonic horn
The ultrasonic horn amplifies the output amplitude of the ultrasonic transducer.
Ultrasonic cutter
Amplify the amplitude further and focus the ultrasound.
Ultrasonic waves are output, and the cutting knife is used to concentrate the ultrasonic energy into the cutting part of the material to be cut. Under the action of huge ultrasonic energy, this part instantly softens and melts, and its strength is greatly reduced. Only a small amount of force is required to achieve the purpose of cutting materials.

Ultrasonic cutting machine features, does not need sharp blades, does not require a lot of pressure, and will not chip or damage the cutting material.
1. The cutting knife is doing ultrasonic vibration, the friction resistance is very small, and the material to be cut is not easy to stick to the blade. It has obvious cutting effect on frozen, viscous and elastic materials. It is especially effective for cutting food, rubber or objects that are inconvenient to apply pressure.
2. At the same time of cutting, the cutting part has fusion. Sealing the cutting part can prevent the loosening of the cut material (such as the flash of textile materials). The use of the ultrasonic cutting machine can also be expanded, such as digging holes, shoveling, scraping paint, carving, slitting and so on.

This equipment uses the high-speed micro-vibration of 20,000 to 30,000 times per second of the blade to reduce the friction between materials and the difficult-to-cut synthetic resin products, rubber products, non-woven fabrics, film, composite products and other industrial collars. Damage caused by the city’s products,

It can be used for manual work or installed on automated equipment.

R-Responsibility P-Products S-Service

sale the right products instead of the expensive one

Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the right product for the customer. So before each order, we will confirm all the details, including application details, equipment conditions, equipment specific information.

And we have the Professional import and export company， HangZhou LanBen Trade Co., Ltd, can export to any country wordwide.

Before year 2012, we only sale second branson / dukane / rinco / herrman/telsonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about transducer , to use ultrasonic equipment better, to save cost when meet problem.

The same to generator, Unreasonable operation may shorter the use-life of ultrasonic generator. So we have to make technical inquiry before operate ultrasonic welding machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment.

Till now , we still have a lot of Branson /dukane/ rinco/ herrman telsonic welding machine, so that we can confirm every transducer/generator we made can matching to the original machine.

Of course we can make the transducer/generator replace for Branson /dukane/ rinco/ herrman telsonic welding machine, we can also make transducer/generator for any application of your ultrasonic equipment. We supply OEM service for oversea customers, we already have OEM customer in USA and German.

If you have any problem in ultrasonic area, welcome contact Rps-sonic.